Material Safety Data Sheet

1.0 Identity and Manufacturer

 
Identity: Epoxy bonded abrasive products
    Manufacturer:                                                 Phone:  (877) 596-3100
Anchor Abrasives Co.                                          (8:00am - 4:00pm CST)
             7651 W. 185th Street
           Tinley Park, IL 60477 USA

              Date Prepared:
              October 1, 2005

 

2.0 Hazardous Ingredients / Identity Information

Component

CAS #

OSHA PEL

ACGIH TLV

Wt. %

Aluminum Oxide

1344-28-1

15 mg/m3

10 mg/m3

50-90

Silicon Carbide

409-21-2

15 mg/m3

10 mg/m3

50-90

Cured Epoxy Resin

25068-38-6

n/a

n/a

10-40

Inert Fillers

n/a

15 mg/m3

15 mg/m3

0-40

 

3.0 Physical / Chemical Characteristics

Boiling Pt.: n/a

Vapor Pressure: n/a

Vapor Density: n/a

Solubility In Water: Insoluble

Appearance and Odor: White to Gray solid, no odor.


Specific Gravity: 1.5 - 3.0 g/cc

Melting Point: n/a

Evaporation Rate: n/a

 

4.0 Fire and Explosion Hazard Data

Flash Point: n/a

Extinguishing Media: Water, Foam, Dry Chemical, CO2

Special Procedures: MSHA/NIOSH approved self-contained breathing apparatus when in an enclosed area. Avoid inhalation of gases.

Unusual Hazards: Organic dust/air mixtures are highly flammable. Avoid dust accumulations and sources of ignition.

  

Flammable Limits: For Dust
LEL: .025 oz./ft3
UEL: n/a

 

5.0 Reactivity Data

Stability: Stable

Conditions to avoid: None Known

Incompatibility: Strong Organic Oxidizers

Hazardous Decomposition: n/a

Hazardous Polymerization: Will not occur

 

6.0 Health Hazard Data

Routes of entry: Inhalation: TLV 10 mg/m3 Skin: n/a

Ingestion: n/a
   
Health Hazards:

Acute: Inhalation of dust generated during use may cause coughing or shortness of breath.

Chronic: Prolonged exposure above TLV may cause respiratory problems.

Carcinogenicity: n/a

Signs and Symptoms of Overexposure: Choking sensation

Medical conditions aggravated by overexposure: Pre-existing Pulmonary
conditions which are aggravated by nuisance dust.

Emergency and First Aid Procedures: Remove to dust free area.

 

7.0 Precautions for Safe Handling and Use

Steps to be taken in case of spill: Collect in most convenient and safe manner for disposal.

Waste Disposal Method: In accordance with Federal, State, and Local regulations as a dry solid.

Storage / Handling Precautions: Handle in accordance with ANSI B7.1
"Safety Requirements for the Use, Care and Protection of Abrasive Wheels"

Other Precautions: Inspect disc for damage upon arrival and prior to mounting.

 

8.0 Control Measures

Respiratory Protection: NIOSH approved respiratory protection recommended if TLV is exceeded.
Ventilation:

Local: To remove dust during use
Gen.: Mechanical Dust collection system
Spec.: n/a

Protective Gloves: Suitable for grinding

Eye Protection: Safety glasses are highly recommended.

Other Protection: As required for a grinding operation.

Work/Hygienic Practices: n/a

Similar to OSHA 1218-0072

Disclaimer: All information and recommendations appearing on this Safety Data sheet are based upon data believed to be reliable. It is the user's responsibility to determine the suitability for their own use and to comply with all applicable regulations. No guarantee, either expressed or implied is made by Anchor Abrasives Company as to the safety and toxicity of the product, nor does Anchor Abrasives Company assume any liability arising from the use of this product.

 

back to previous page